Description
- Additional information
This is the Winchester 1200 1300 Extractor, factory part 24102, for 12 and 16 gauge breech bolts.
Winchester used one extractor across the entire line — the 1200 and 1300XTR pumps and the 1400, 1400 Mark II and 1500XTR autoloaders all share part 24102 in both 12 and 16 gauge. Machined and molded examples of 24102 both exist. This one is the machined version, identified by fine parallel tool marks across the claw face, sharper edges, and no mold cavity number on the side.
Condition: Used. Uniform gray, no finish remaining. Machining marks still crisp on the claw face, no polishing or heavy wear. Claw shows no chipping or deformation.
Included: Extractor only, the exact part pictured. The extractor spring is a separate factory part, 25102, and is not included.
Fits:
- Winchester Model 1300XTR, 12 gauge 3″ Magnum
- Winchester Model 1200, 12 and 16 gauge, both serial ranges (below and above 382,500)
- Winchester Model 1400 and 1400 Mark II, 12 and 16 gauge, right-hand
- Winchester Model 1500XTR, 12 gauge
- Winchester Model 1200 and 1300XTR 3″ Magnum, 12 gauge
Does not fit: 20 gauge guns of any of these models — the 20 gauge extractor is factory part 78102, search that number instead. Does not fit the left-hand Model 1400 Mark II, which uses 16211LH. Not for the Model 12, Model 97, Model 42 or Model 1887. We have not verified interchange with the Turkish-built SXP (Super X Pump), so do not assume it.
Fitting: Extraction part. Seat the extractor fully in the breech bolt and function-check ejection with dummy rounds before live fire. If the bolt will not close fully into battery, the arm is standing proud on the back side and needs relieving.
Fitment taken from the Winchester Component Parts catalog dated January 2, 1980, covering the Models 1200, 1300XTR, 1400, 1400 Mark II and 1500XTR.
Please note: Buyer is responsible for verifying correct fit for their specific firearm. Installation should be performed by a qualified gunsmith. Please review all photos, as they are part of the description and show the actual item you will receive.
Condition: Used. Smooth machined steel, no finish remaining. Broaching marks still crisp inside both hook recesses and on the machined faces, with no polishing or heavy wear. Hook lips are intact — square leading edges, no chipping, rounding, or lipping, and the recesses are clean. Part is straight with symmetrical arms and no crack at either arm root. A few shallow scattered pits on the upper arm and spine, cosmetic only. Light burnishing on the arm contact faces.
Additional information
| Weight | 0.2 lbs |
|---|---|
| Dimensions | 7 × 5 × 0.5 in |
| Part |
Extractor |
| Brand |
Winchester |
| For Gun Make |
Winchester |
| Model |
1300XTR, 1400, 1500XTR, Winchester Models 1200 |
| Gauge/Caliber |
12 Gauge / 16 Gauge |
| For Gun Type |
Shotgun |
| Country of Origin |
United States |
| Color |
White Steel |
| Material |
Steel |
| MPN |
24102 Extractor |
