Description
- Additional information
This is the Winchester 1200 1300 Extractor, factory part 78102, for 20 gauge breech bolts.
Twenty gauge is the only gauge that gets its own extractor in this family. The 12 and 16 gauge guns share part 24102, but every 20 gauge model — the 1200 and 1300XTR pumps and the 1400 and 1500XTR autoloaders — carries 78102 instead. The two parts look similar at a glance, so match on the gun’s gauge rather than on appearance.
Included: Extractor only, the exact part pictured. The extractor spring is a separate factory part, 25102, and is not included.
Fits:
- Winchester Model 1300XTR, 20 gauge 3″ Magnum
- Winchester Model 1200, 20 gauge, including 3″ Magnum
- Winchester Model 1400 and 1400 Mark II, 20 gauge
- Winchester Model 1500XTR, 20 gauge
Does not fit: 12 or 16 gauge guns of any of these models — those use factory part 24102, search that number instead. Not for the Model 12, Model 97, Model 42 or Model 1887. We have not verified interchange with the Turkish-built SXP (Super X Pump), so do not assume it.
Fitting: Extraction part. Seat the extractor fully in the breech bolt and function-check ejection with dummy rounds before live fire. If the bolt will not close fully into battery, the arm is standing proud on the back side and needs relieving.
Fitment taken from the Winchester Component Parts catalog dated January 2, 1980, covering the Models 1200, 1300XTR, 1400, 1400 Mark II and 1500XTR.
Please note: Buyer is responsible for verifying correct fit for their specific firearm. Installation should be performed by a qualified gunsmith. Please review all photos, as they are part of the description and show the actual item you will receive.
Condition: Used. Smooth machined steel, darker gray, no finish remaining. Fine parallel broaching marks still crisp on the arm faces and inside both hook recesses, with no polishing or heavy wear. Hook lips are intact — square leading edges, no chipping, rounding, or lipping, and the recesses are clean. Part is straight with symmetrical arms and no crack at either arm root. No cavity number or molding witness marks; this is the machined variation.
Additional information
| Weight | 0.2 lbs |
|---|---|
| Dimensions | 7 × 5 × 0.5 in |
| Part |
Extractor |
| Brand |
Winchester |
| For Gun Make |
Winchester |
| Model |
1300XTR, 1400, 1500XTR, Winchester Models 1200 |
| Gauge/Caliber |
20 Gauge |
| For Gun Type |
Shotgun |
| Country of Origin |
United States |
| Color |
Blued Steel |
| Material |
Steel |
| MPN |
78102 Extractor |
