Description
- Additional information
This is the Tanfoglio GT27 Sear, for the .25 ACP pocket pistol, also fitting the FIE Titan E27, Excam and Targa versions of the same gun.
Tanfoglio built the GT27 in Italy from the early 1960s and exported it under a stack of different labels. After the Gun Control Act of 1968 shut down imports of small pistols, the Italian parts were brought in and assembled onto Zamak frames cast in the United States — first by Excam of Hialeah, Florida, then by FIE of Hialeah. Beyond the frame material these are substantially the same pistol, which is why one sear covers the whole group. Production ran until 1990.
Included: Sear only, the exact part pictured.
Fits:
- Tanfoglio GT27, .25 ACP
- FIE Titan E27
- Excam GT27
- Targa GT27
- Pistols marked Titan .25 or Titan Twenty Five
Does not fit: The FIE Titan Tiger. Despite sharing the Titan name it is a .38 Special revolver built by Weihrauch in Germany and has nothing in common with this pistol. If that is what you have, this is not your part.
Not verified: We have not compared this against the FIE Titan E-25, GT-26, GT-28, A-27 or Guardian G27, which are cataloged as separate models. Compare against the sear in your pistol before ordering for any of those.
Fitting: This is a fire control part and should be fit by a qualified gunsmith. Compare the nose, the pivot hole and the overall profile against the sear coming out of your pistol before installing. Once assembled, function check on an empty gun before loading: confirm the hammer holds at cock, that it does not drop when the frame is bumped, that the trigger releases and resets cleanly between cycles, and that the safety functions in both positions. Watch for hammer follow and failure to reset. Do not load the pistol until it passes.
Please note: Buyer is responsible for verifying correct fit for their specific firearm. Installation should be performed by a qualified gunsmith. Please review all photos, as they are part of the description and show the actual item you will receive.
Condition: Used, with the original dark finish intact and even across the part. No rust, no pitting, no chips. Bright wear shows along the upper edge of the hooked arm, along the edges of the lower shelf, and as a ring around the pivot hole where the pin bore against it — all normal contact wear. The hook is intact with no cracks and the part is straight and true.
Additional information
| Weight | 0.2 lbs |
|---|---|
| Dimensions | 7 × 5 × 0.5 in |
| Part |
Sear |
| Brand |
Tanfoglio / FIE / Excam / Targa |
| For Gun Make |
Tanfoglio / FIE / Excam / Targa |
| Model |
Tanfoglio GT27 / FIE Titan E27 / Excam GT27 / Targa GT27 |
| Gauge/Caliber |
.25 ACP |
| For Gun Type |
Handgun|Auto Pistol |
| Country of Origin |
Italy |
| Color |
Blued Steel |
| Material |
Steel |
