Description
- Additional information
This is a Ruger P Series Sear, unmarked, for the alloy-frame P series decocker model pistols in 9mm and .40 Auto.
Ruger assigned sear part numbers by trigger configuration rather than by model, so one number covers all five decocker guns while the manual safety and double action only pistols carry different numbers. The parts themselves are unmarked. Compare against the sear you removed before ordering.
Fits: P89D, P91D, P93D, P94D and P944D.
Two variations observed: We have observed two castings in circulation for this application. On one, the boss at the upper right, opposite the lever arm, forms a full collar. On the other, shown here, it extends roughly halfway around. If the sear in your gun has a full collar, compare carefully before ordering.
Does not fit: P90D pistols in .45 ACP, which use their own sear. Manual safety and double action only models, which use different sears again. P345, P95 and P97 pistols, which use a visibly different multi-piece sear design rather than the single casting shown here.
Fitting: This is a fire control part and must be installed by a qualified gunsmith. After installation, function check thoroughly with dummy rounds before live fire. Watch for hammer follow as the slide closes, doubling, and failure of the sear to reset between shots. Do not load the pistol until it passes a full function check.
You will receive one of the parts pictured. All are the half boss casting described above and are equivalent.
Please note: Buyer is responsible for verifying correct fit for their specific firearm. Installation should be performed by a qualified gunsmith. Please review all photos, as they are part of the description and show the actual item you will receive.
Condition: Uniform matte silver as-cast surface. No rust, pitting or corrosion. The integral pivot stud and the boss opposite the lever arm are both intact with no chipping or deformation. The through-hole is clean and round. No cracks visible at the base of the lever arm. Unmarked.
Additional information
| Weight | 0.2 lbs |
|---|---|
| Dimensions | 7 × 5 × 0.5 in |
| Part |
Sear |
| Brand |
Ruger |
| For Gun Make |
Ruger |
| Model |
P91D, P93D, P94D and P944D, Ruger P89D |
| Gauge/Caliber |
9mm / .40 S&W |
| For Gun Type |
Handgun|Auto Pistol |
| Country of Origin |
United States |
| Color |
White Steel |
| Material |
Steel |
